Some tips on invitation cards:
Create an envelope more than the contents
For invitation cards, business sticky labels attached to the recipient's name and address is the business party invitation own wedding, not his party card vendor. Because we are human, there must be errors around the paste sticking labels: a label affixed to side, the label got scattered, water / ink was still wet already held a writing faded, after the label affixed to realize the name / address was wrong, after all unused invitations just realized there other party is more important that has not been invited, and many more.
In essence, if this happens what to do? Who had taped label on the envelope should be sweet off again! Unfortunately, producers Tom & Jerry's label already use sophisticated technology at their label: it really hard to pin removed without a trace. (Sorry if you just call Tom & Jerry, but I think Tom & Jerry is still controlled almost 100% market labels wedding invitations).
As a result, the envelope label parts of the former is usually impeccable. If it's a little flawed okay, just overwritten wrote a new label. But if a fatal defect, there's no other way, the envelope must be discarded.
If the envelope removed, mean ...? Its contents are not guilty of anything so it would not be used!
So I suggest, try negotiating with the printing press and ask for printed invitation envelope more. So if there are events like this, living instead wrote a new envelope with.
Besides this, there are also other techniques. There are model invitation cards labels affixed his name on a small cardboard sheet, then this sheet with a ribbon tied to the envelope / invitation card. So if one stick labels, only small pieces of this that need to be replaced.
There is also a label attached to his name on the invitation envelope plastic wrap. This technique was also OK, although not good because if the plastic was opened so it would not get caught is an invitation for anyone.
Good transparent label for bright colored card
Later, a transparent label began widely used in the invitation cards. It seems indeed more beautiful than the usual white label used for this. But this label is not an all-round. When used in a dark-colored invitations, we must be very carefully put it to the entire flat surface of the label on the card. If not, will appear like glass effects cheap cars: arise as bubbles, namely the parts that are not glued properly, so become ugly.
So when an invitation lo dark color, and lo people do not diligently, should avoid using the label transparent.
If the invitation bright colors, go ahead, these labels do look pretty (and I think that this label is more easily removed than the white label).
Got your own design? Find printer nearby house / office / easily approached
After browsing the forums I weddingku.com discussion, I conclude:
If you could design / already have their own design, pick a pretty good printer and its location near.
If you already have your own design, meaning you do not need to go to a popular vendor (do not need their services for the design of the invitation). Secondary vendor was OK. If the terms of printing techniques, our experience of hell, a popular vendor technical and secondary vendors who did not seem much different.
The second important thing is, the vendor should be easy you visit. This is so you can easily consultation (if you want to design this way, the price so what, what other alternatives there), and so you can control them have to work around. It was no secret, the promise of Indonesia can not be held. If late, there was just reason. Finally, if you want your invitation is complete according to schedule, there's no other way, have you checked himself diligently to them how the process. Number can, but they will also more likely to feel pressure (take the positive sense) that we will come and go.
Create an envelope more than the contents
For invitation cards, business sticky labels attached to the recipient's name and address is the business party invitation own wedding, not his party card vendor. Because we are human, there must be errors around the paste sticking labels: a label affixed to side, the label got scattered, water / ink was still wet already held a writing faded, after the label affixed to realize the name / address was wrong, after all unused invitations just realized there other party is more important that has not been invited, and many more.
In essence, if this happens what to do? Who had taped label on the envelope should be sweet off again! Unfortunately, producers Tom & Jerry's label already use sophisticated technology at their label: it really hard to pin removed without a trace. (Sorry if you just call Tom & Jerry, but I think Tom & Jerry is still controlled almost 100% market labels wedding invitations).
As a result, the envelope label parts of the former is usually impeccable. If it's a little flawed okay, just overwritten wrote a new label. But if a fatal defect, there's no other way, the envelope must be discarded.
If the envelope removed, mean ...? Its contents are not guilty of anything so it would not be used!
So I suggest, try negotiating with the printing press and ask for printed invitation envelope more. So if there are events like this, living instead wrote a new envelope with.
Besides this, there are also other techniques. There are model invitation cards labels affixed his name on a small cardboard sheet, then this sheet with a ribbon tied to the envelope / invitation card. So if one stick labels, only small pieces of this that need to be replaced.
There is also a label attached to his name on the invitation envelope plastic wrap. This technique was also OK, although not good because if the plastic was opened so it would not get caught is an invitation for anyone.
Good transparent label for bright colored card
Later, a transparent label began widely used in the invitation cards. It seems indeed more beautiful than the usual white label used for this. But this label is not an all-round. When used in a dark-colored invitations, we must be very carefully put it to the entire flat surface of the label on the card. If not, will appear like glass effects cheap cars: arise as bubbles, namely the parts that are not glued properly, so become ugly.
So when an invitation lo dark color, and lo people do not diligently, should avoid using the label transparent.
If the invitation bright colors, go ahead, these labels do look pretty (and I think that this label is more easily removed than the white label).
Got your own design? Find printer nearby house / office / easily approached
After browsing the forums I weddingku.com discussion, I conclude:
- All vendors invitation card good enough (whose name is on weddingku.com) same problem that is service: promise stretch, we came not be served, etc..
- Popular vendors are vendors who have the human resources that can make an invitation designs are good.
If you could design / already have their own design, pick a pretty good printer and its location near.
If you already have your own design, meaning you do not need to go to a popular vendor (do not need their services for the design of the invitation). Secondary vendor was OK. If the terms of printing techniques, our experience of hell, a popular vendor technical and secondary vendors who did not seem much different.
The second important thing is, the vendor should be easy you visit. This is so you can easily consultation (if you want to design this way, the price so what, what other alternatives there), and so you can control them have to work around. It was no secret, the promise of Indonesia can not be held. If late, there was just reason. Finally, if you want your invitation is complete according to schedule, there's no other way, have you checked himself diligently to them how the process. Number can, but they will also more likely to feel pressure (take the positive sense) that we will come and go.
0 comments:
Post a Comment